RAM SRT-10 Pickup V10-505 8.3L (2004)
4.
Install the mirror with washer, p/n 06100876, positioned over the lower rear stud on the mirror (Fig. 1). The washer should sit between the gasket
and the body of the mirror. Tighten the nuts to 7 Nm (60 in. lbs.).
5.
Install the door trim panel.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.