dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

TCC Solenoid - Surge at Steady Cruise|Page 2283 > < Component Locations|Page 2271
Page 1
background image

Torque Converter Clutch Solenoid: Customer Interest
TCC Solenoid - Surge at Steady Cruise

Models

1987-1988 C-K-E-GH-J-P Body Equipped With 2.5L & 3.0L Engine

1987-1988 S Body Equipped With 3.0L Engine

Subject

Lock-Up Torque Convertor Surge/ Buck at 35-55 MPH

Index

DRIVEABILITY

Date

March 28, 1988

No.

18-03-88 REVISION A

P-1167 (C18-06)
This bulletin replaces Technical Service Bulletin 18-13-87 and 18-03-88 which should be removed from your files. A required revision has been made to
the warranty labor operation number. This new labor operation number becomes effective with the issuance of this bulletin March 28, 1988.

SYMPTOM/CONDITION

A surge may be noticed at steady cruising speeds above 35 mph. In addition, bucking may occur under light deceleration conditions, especially when
cresting a hill.

DIAGNOSIS

The above conditions can be diagnosed by disconnecting the transmission lock-up torque converter solenoid, and driving the vehicle under the above
conditions. If the problem goes away, follow the repair procedure below. If either problem is still present, refer to the Diagnostic Test Procedure for
correction.

PARTS REQUIRED

Driveability Kit PN 4419447
Consists of:

1

Wiring Jumper Assembly

PN 4400768

1

Lock-Up Solenoid Cap

PN 4419446

2

Tie Wrap

PN 6015756

1

Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

The following procedure involves disconnecting the lock-up torque convertor solenoid. The customer should be advised that after this repair is
performed, a loss in fuel economy of 1 to 2 miles per gallon may be noticed, depending on driving conditions.

TCC Solenoid - Surge at Steady Cruise|Page 2283 > < Component Locations|Page 2271