dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Trim Panel > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Headliner: Service and Repair

Head Lining

1. Disconnect battery negative cable.
2. Pull dome lamp downward to disengage from retaining ring in head lining. Separate lens from lamp body and remove bulb. Separate bulb bolder

from lamp body. Remove attaching screw holding retaining ring to roof bow,

3. Remove screws holding coat hooks to roof above rear door.
4. Remove roof rail and A-pillar mouldings.
5. Remove screws holding sun visors to roof header and disconnect wire connector, if equipped. Remove inboard sun visor hangers.
6. Remove overhead console, if equipped.
7. Pull front reading lamp downward to disengage from retaining ring in head lining and disconnect wire connector. Remove screws holding retaining

ring to roof header.

8. Remove pinch welt holding headlining to sun roof opening, if equipped.
9. Remove inside rear view mirror from windshield bracket if necessary.

10. Disengage hook and loop fasteners holding head lining to roof above rear window and slide head lining forward about 25 mm (1 in.).
11. Shift the front of head lining to one side to pull head lining from behind B-pillar trim. Pull head lining from behind other B-pillar trim.
12. Allow front of head lining to drop downward. Slide head lining forward from behind quarter panel trim.
13. Remove head lining from vehicle.
14. Reverse the preceding operation for installation.

Trim Panel > < Air Bag(s) Arming and Disarming|Service and Repair