dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blend Door Actuator Replacement|Page 4666 > < Blend Door Actuator Replacement|Page 4664
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Recirculation Air Door Actuator Replacement

CAUTION:  Do not remove any of the motor actuators from the Heater/AC unit assembly with any electrical power applied. Removal should only be
done with the Ignition OFF and battery cable removed. The actuators have no mechanical stops to limit their travel. if the actuator rotates and is not
connected to the unit assembly, it will become un-calibrated.

REMOVAL AND INSTALLATION

1. Remove the glove box/ash tray assembly.
2. Remove under panel silencer pad.
3. Remove the carpeted cover over the air bag module.
4. Remove the right front kick panel.

Brace Removal

5. Remove metal instrument panel brace.

Actuator Mounting Bracket

6. Remove two screws mounting the actuator mounting bracket to the A/C-heater case.

Blend Door Actuator Replacement|Page 4666 > < Blend Door Actuator Replacement|Page 4664