Shadow L4-153 2.5L SOHC VIN B (1993)
Receiver Dryer: Service and Repair
REMOVAL AND INSTALLATION
CAUTION: The refrigerant system must be completely discharged before proceeding with this operation.
High Pressure Relief Valve
1. Remove the two high pressure refrigerant line retaining nuts from the sides of the filter-drier assembly and carefully separate lines from filter-drier.
2. Using plastic sheeting and tape cover the open ends of the refrigerant lines to minimize refrigerant system contamination.
3. Remove two mounting strap bolts and lift the filter-drier from vehicle. If replacing the filter-drier assembly transfer the mounting strap to
replacement part.
To install, replace all 0-rings and gaskets, coat all sealing surfaces with wax free refrigerant oil and reverse the preceding operation.
