Shadow L4-153 2.5L SOHC VIN B (1993)
Fig. 3 Fuel Injector
4. Place a small screwdriver in the hole in the front of the electrical connector and gently pry the injector from the throttle body (Fig. 2). Remove
O-ring, if it did not come out with injector.
INSTALLATION
1. Replace injector O-rings, (a new injector should already have the upper O-ring installed).
Fig. 4 Fuel Injector Installation
2. Apply a light coat of 30 weight engine oil to the O-rings. Install the injector into throttle body and align the wiring cables with the injector cap
fastener hole (Fig. 4).
Fig. 5 Fuel Injector Cap Installation
