dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Stop Light Switch - Wiring Connector Service|Page 6241 > < Diagram Information and Instructions|Page 6236
Page 1
background image

Stop Lamp Switch: Technical Service Bulletins
Stop Light Switch - Wiring Connector Service

NO.: 08-67-93

GROUP: Electrical

DATE: Dec. 31, 1993

SUBJECT:
Stop Light Switch Wiring Connector Service

MODELS:

1995

(PL)

Neon

1994

(AA)

Spirit/Acclaim/LeBaron Sedan

1994

(AJ)

LeBaron Convertible

1994

(AP)

Shadow/Sundance

1994

(AS)

Caravan/Voyager/Town & Country

1994

(BR)

Ram Pickup

1994

(LH)

Concorde/Intrepid/Vision

1994

(LH)

LHS/New Yorker

1994

(ZJ)

Grand Cherokee

SYMPTOM/CONDITION:

When servicing the stop light switch or wiring connector, the stop light switch wiring connector may be difficult to remove from stop light switch.
Attempts to remove the wiring connector may damage the insulator wedge or the switch itself.

REPAIR PROCEDURE:

This bulletin involves removing the stop light switch with wiring connector attached as an assembly before disconnecting the wiring connector.

1.

Remove the stop light switch, with wiring connector still attached to the switch, by turning the switch counterclockwise 1/16 turn and pulling
straight out of the mounting bracket.

2.

Depress and hold down both locking tabs on the "blue" wiring insulator wedge and pull the wiring connector from the stop light switch insulator,
Figure 1.

NOTE:

DISCONNECTING THE WIRING CONNECTOR HARNESS FROM THE SWITCH BY PULLING ON THE WIRING MAY RESULT IN OPEN
CIRCUITS.

Stop Light Switch - Wiring Connector Service|Page 6241 > < Diagram Information and Instructions|Page 6236