Shadow V6-181 3.0L SOHC (1994)
Seat Belt Retractor: Service and Repair
Shoulder Belt Retractor with Floor Console
1. Disconnect shoulder belt buckle from carrier, then remove armrest and disconnect electrical connector at front of console.
2. Remove stub nuts and driver side buckle, then remove bolt and washer from floor on passenger side and lift retractor assembly out of position.
3. Reverse procedure to install. Torque driver side buckle bolt and passenger side bolt and washer to 29 ft. lbs., stub nuts to 9 ft. lbs. and armrest
screws to 17 inch lbs.
