Shadow V6-181 3.0L SOHC VIN 3 FI (1993)
Cylinder Head Gasket: Service and Repair
Cylinder Head Installation
INSTALL HEADS
1. Clean surfaces of head and block, install head gasket over locating dowels.
2. Install head on locating dowels.
3. Install 10mm Allen Hex head bolts with washers.
Fig. 16 Cylinder Head Bolt Tightening Sequence
4. Tighten bolts in the order shown in Fig. 16. When tightening the cylinder head bolts, tighten gradually, working in two or three steps and finally
tighten to specified torque of 108 Nm 80 ft. lbs..
INSTALL CAMSHAFTS
Lubricate camshaft journals and cams with engine oil and install camshaft on cylinder head.
Fig. 8 Camshaft Bearing Caps Position
REASSEMBLE ROCKER ARMS
1. Align the camshaft bearing caps with arrows depending on cylinder bank, directed as shown in Fig. 8 and in numerical order.