Shadow Convertible L4-135 2.2L SOHC (1991)
Compressor Clutch: Service and Repair
Compressor Clutch / Coil Assembly Replacement
Fixed Displacement Compressor
REMOVAL
Clutch Retaining Nut
1. Using a 13 mm socket and spanner wrench Tool C4563, remove the shaft nut and then lock washer.
Removing Clutch Front Plate
2. Screw clutch front plate puller Tool C-4771 into hub. Tighten center screw and remove front plate, and shims.
CAUTION: Do not use screwdrivers between front plate assembly and pulley to pry off front plate because this may damage the front plate
assembly.