Shadow Convertible L4-135 2.2L SOHC VIN D FI (1992)
Wiper Arm: Service and Repair
REMOVAL
Removing Wiper Arm
1. Lift the wiper arm and place a 3.17mm (1/8 inch) pin into the arm pin hole.
Wiper Arm Head Cover And Nut
2. Lift the head cover and remove the wiper arm attaching nut.
3. Remove the wiper arm from the pivot using a rocking motion.
INSTALLATION
1. Clean the wiper pivot shaft of any metal filings using a wire brush.
2. Position wiper arm so that the blade tip is 19.05 mm (3/4 inch) from the top of the cowl screen.
3. Secure arm to pivot with attaching nut and tighten 17 to 22 Nm (155 to 195 in. lbs.) torque.
4. Close head cover and remove pin from arm pin hole.
