Shadow Convertible L4-153 2.5L SOHC (1994)
Adjust down-stop in or out to set top stack down position height.
CAUTION: Avoid setting top stack position too low, top cover can be pinched and cut between wheelhouse and fourth bow.
Seal base of down-stop with silicone after adjusting to prevent water leaks.
Top Stack Up-Stop
Adjust up-stop in or out to change the contact with the rear rail. This will effect the fore/aft position of the No. 1 bow.
Fourth Roof Bow Slat
Adjust the fourth roof bow slat to reduce wrinkles and bagging around rear window and sail panels.
1. Verify convertible top is up and latched.
2. Loosen bolts holding the slat to the fourth roof bow.
3. Slide the bow up or down as necessary and tighten bolts.
Rear Tensioner Plate
Adjust rear tensioner plate by loosening screws, positioning plate forward or backward, and tightening screws. Tension can be adjusted on the back of
the top cover by varying contact.
