dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Windshield Header Moulding Removal|Page 4909 > < Windshield Header Moulding Removal|Page 4907
Page 9
background image

12. Reverse the preceding operation.

Stationary Quarter Glass and Weatherstrip Removal

Stationary Quarter Glass And Weatherstrip

REMOVAL

1. Lower convertible top.
2. Remove quarter trim panel.
3. Remove nut holding quarter glass to rear roof rail.
4. Remove nuts and plastic insulators holding quarter glass to lower mounting bracket. Separate mounting stud plate and plastic insulators from glass.
5. Slide glass downward to clear upper stud from top rail.
6. Separate glass and weatherstrip from convertible top frame.

Quarter Glass Roof Rail And Weatherstrip

INSTALLATION

1. Install roof rail weatherstrip on glass.
2. Position glass assembly in convertible top frame opening.
3. Install nut and washer to hold upper glass stud to top rail.
4. Install lower glass stud plate and plastic insulators through holes at bottom of glass.
5. Install plastic insulators and nuts to hold glass and stud plate to spring bracket.
6. Before tightening nuts at top and bottom of glass, verify alignment to door glass and top rail weatherstrip.
7. Secure all nuts holding glass to vehicle and install quarter trim panel.

Top Lift Assist Cylinder Removal

Windshield Header Moulding Removal|Page 4909 > < Windshield Header Moulding Removal|Page 4907