dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Cruise Control Vacuum Solenoid > < Speed Control Switch - Loose/Rattles|Page 4973
Page 1
background image

Cruise Control Switch: Service and Repair

Fig. 22 Speed Control Switch Location

The speed control switch is mounted in the steering wheel and wired through the clock spring device under the steering wheel hub.

1. Remove air bag module as described under Air Bag/Service and Repair.
2. Turn ignition switch to Off position.
3. Remove two screws from back side of steering wheel.
4. Rock switch away from air bag or horn pad while lifting switch out of steering wheel. Do not point air bag module toward yourself or others when

performing this operation to prevent injury in case of accidental deployment of air bag module.

5. Disconnect 4-way electrical connector.
6. Reverse procedure to install, sliding the forward edge of switch under air bag or horn pad. Line up locating pins on switch with holes in steering

wheel frame. Do not point air bag module toward yourself or others when performing this operation to prevent injury in case of accidental
deployment of air bag module.

Cruise Control Vacuum Solenoid > < Speed Control Switch - Loose/Rattles|Page 4973