dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Control Module - Erratic Idle Speed|Page 1501 > < Component Locations|Page 1492
Page 1
background image

Powertrain Control Module: Customer Interest
Engine Control Module - Erratic Idle Speed

SUBJECT: Revised Engine Controller For Improved Automatic Idle Speed (AIS) Control

NO.: 18-02-91

GROUP: DRIVEABILITY

DATE: Feb. 25, 1991

MODELS:

1991

(AA)

SPIRIT/ACCLAIM/LEBARON

(AC)

DYNASTY/NEW YORKER/SALON

(AG)

DAYTONA

(AJ)

LEBARON COUPE/LEBARON CONVERTIBLE

(AP)

SHADOW/SUNDANCE

(AS)

CARAVAN/GRAND CARAVAN/CARAVAN C/V

            

VOYAGER/GRAND VOYAGER/TOWN & COUNTRY

SYMPTOM/CONDITION:

Subject vehicles that exhibit the need for improved Automatic Idle Speed control consistency likely require SMEC/SBEC replacement. The replacement
engine controllers have been superseded to new controllers offering improved engine Automatic Idle Speed control.  The following diagnosis and repair
procedures will avoid unnecessary replacement of other components.

DIAGNOSIS:

Using a DRB II tester and the appropriate diagnostic procedure manual, verify that all vehicle engine systems are functioning as designed (no fault codes
are present). If all systems are functioning correctly, proceed with the following replacement.

PARTS REQUIRED:

1

Engine Controller (SMEC/SBEC) for 1991 EFI Engines

AP Body, 2.2L, Federal, Automatic

PN 4672464

AP Body, 2.2L, California, Automatic

PN 4672472

AP Body, 2.2L, Federal, Manual

PN 4672451

AP Body, 2.2L, California, Manual

PN 4672449

AA/AG/AJ/AP Body, 2.5L, Federal, Automatic

PN 4672447

AA/AG/AJ/AP Body, 2.5L, Calif., Automatic

PN 4672445

AA/AG/AP Body, 2.5L, Federal, Manual

PN 4672470

AA/AG/AP Body, 2.SL, Calif., Manual

PN 4672466

AS Body, 2.5L, Federal, Automatic

PN 4672478

AS Body, 2.5L, California, Automatic

PN 4672476

AC Body, 2.5L, Federal, Automatic

PN 4672482

1 Authorized Modification Label

PN 4275086

REPAIR PROCEDURE:

This repair involves replacement of the original engine controller (SBEC) with a revised unit.

1.

Replace the engine controller (SBEC) with the appropriate unit as called out in PARTS REQUIRED.

Engine Control Module - Erratic Idle Speed|Page 1501 > < Component Locations|Page 1492