Shadow Convertible L4-153 2.5L SOHC VIN B (1993)
Power Door Lock Actuator: Service and Repair
Front Door
Front Power Door Lock Actuator
1. Disconnect battery negative cable.
2. Remove front door trim panel.
3. Remove water shield as necessary.
4. Remove rivets holding lock motor to inner door panel with a 6 mm (1/4 in.) drill.
5. Disconnect lock motor linkage rod from door latch.
6. Disconnect lock motor wire connector.
7. Separate lock motor from door.
8. Reverse the preceding operation for installation.
