dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Convertible Top Boot - Difficult to Install|Page 4880 > < Convertible Top - High Latch/Guide Pin Effort|Page 4874
Page 1
background image

Convertible Top: All Technical Service Bulletins
Convertible Top Boot - Difficult to Install

NO.: 23-04-92

GROUP:

Body

DATE:

Feb. 10, 1992

SUBJECT:
Convertible Top Boot Difficult To Install

MODELS:
1991-1992 (AP) Shadow Convertible

SYMPTOM/CONDITION:

On some of the subject vehicles convertible top boot installation may be difficult. The position of the top stack downstops may prevent the top from
going down far enough to allow easy installation of the boot. Adjusting the top stack height downward will ease boot installation.

REPAIR PROCEDURE:

This procedure outlines the adjustment of the convertible top stack downstops.

1.

Lower the door glass, unlatch and lower the top.

2.

Measure the vertical distance from the center, forward edge of the rear belt molding to the leading edge of the No. 1 bow (Fig. 1). This dimension
should not exceed 3 1/2 in. (90 mm) (Fig. 2).

Convertible Top Boot - Difficult to Install|Page 4880 > < Convertible Top - High Latch/Guide Pin Effort|Page 4874