Shadow Convertible V6-181 3.0L SOHC VIN 3 FI (1993)
Cruise Control Servo Cable: Service and Repair
1. Remove air cleaner assembly.
2. Disconnect cable from retaining clamp:
a. On FWD models, disconnect cable from carburetor stud by removing spring clip.
b. On RWD models, disconnect cable from carburetor lost motion link by removing spring clip.
3. Disconnect cable from servo, then remove cable assembly.
4. Reverse procedure to install. Leave nut loose and adjust throttle cable freeplay as described in the individual car chapters.
