dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wiper Control Module|Testing and Inspection > < Wiper Control Module|Locations
Page 1
background image

Wiper Control Module: Description and Operation

Pulse Intermittent Windshield Wiper Controller

PULSE INTERMITTENT WINDSHIELD WIPER CONTROLLER (PIWWC)

The controller is a part of the washing and wiper system which includes:
-

Pulse intermittent windshield wiper controller

-

Wiper blades and arms

-

Wiper motor

-

Windshield washer reservoir

-

Wiring harness

-

Windshield washer pump

-

Windshield washer hoses

Any part not working properly could cause the whole system not to work properly or at all. If the system is not working proper, check all parts before
taking any action of part replacements.

The controller controls the pulse/wipe and the intermittent modes only. The time delay in the intermittent wipe mode is a minimum of 45 to a
maximum of 25 seconds depending on the switch setting.

The wash function can be turn ON with the wiper control switch in the OFF position. Pressing the wash button on the end of the level will operate the
washer pump until released. The wipers will operate while the pump is operating and continue for about three addition wipes (ii) after before parking.

LOCATION

The PIWWC is attached to a bracket located to the right of the steering column behind the steering column cover.

Wiper Control Module|Testing and Inspection > < Wiper Control Module|Locations