Spirit V6-181 3.0L SOHC VIN 3 FI (1993)
Disk And Spacers
Disk And Spacers Removed
6. Remove disc spacers and disc. Check disc for warpage, cracks or damaged slots.
Photo Optic Sensing Unit
7. Remove bushing and photo optic sensing unit fasteners, and remove unit.
INSTALLATION
1. Install bushing and photo optic sensing unit and tighten fasteners.
2. Install disc spacers and disc and tighten disc assembly screw.
3. Install lead wire, and tighten lead wire screw.
4. Install protective cover.
5. Install rotor and tighten rotor screw.
6. Install distributor cap, and tighten cap hold down screws.
