Spirit R/T L4-135 2.2L DOHC Turbo (1991)
3.
If there is a gap between the engine mount outer metal and insulator, see Fig. 1, replace the front engine insulator assembly. NOTE: THIS NOISE
IS MORE NOTICEABLE OUTSIDE OF THE VEHICLE.
MANUAL TRANSAXLE:
1.
Raise the vehicle with an assistant inside of the vehicle.
2.
Start the vehicle and observe the front engine mount, while the assistant shifts from neutral to first gear and neutral to reverse while releasing the
clutch slightly.
3.
If there is a gap between the outer metal and insulator, see Fig. 1, replace the front engine insulator assembly.
NOTE: THIS NOISE IS MORE NOTICEABLE OUTSIDE OF THE VEHICLE.
PARTS REQUIRED:
LEFT ENGINE MOUNT: - All except AC, AY Bodies and LeBaron and Shadow Convertibles:
1
Support Assembly:
Manual Transaxles
4668114
3 Speed, Automatic Transaxles
4668132
4 Speed, Automatic Transaxles
4668133
FRONT ENGINE MOUNT:
1
Insulator Assembly:
All 2.2L & 2.5L Automatic Transaxles
4612017
AC, AY, Bodies with 3.3L Engine
AY Body with 3.8L Engine
AS Bodies with 2.5L Engine, Automatic/Manual Transaxle
All 2.2L & 2.5L Manual Transaxles
4537072
AC Body with 3.0L Engine
AS Body with 3.3L Engine
AA,AG,AJ,AQ,AS Bodies with 3.0L engine
5272099
AS Body with 3.0L engine and Trailer Tow/Taxi pkg.
4556376
AS Body with 3.3L Engine - AWD
4612005
REPAIR PROCEDURE:
This repair involves replacement of either the left or front engine mount with a revised mount.
1.
Refer to the appropriate Service Manual for replacement procedures.
2.
Replace the appropriate mount with the mount called out in PARTS REQUIRED.