Spirit R/T L4-135 2.2L DOHC Turbo (1991)
Window Regulator: Service and Repair
Rear Door Window Regulator
Rear Door Window Regulator - Manual
MANUAL WINDOW REGULATOR
1. Remove trim panel, silencer pad, and water shield.
2. Position door glass 150 mm (6 in.) up into glass opening. Pull upward firmly at front edge of glass to disengage lower glass run guide from
division channel.
3. Remove bolts bolding window regulator to inner door panel.
4. Slide roller from window lift channel.
5. By hand, pull glass upward to 25 mm (1 in.) from full up position. Using suitable tape, secure door glass to upper window frame.
6. Remove regulator assembly from door.
7. Reverse the preceding operation for installation.
Rear Door Window Regulator - Power
POWER WINDOW REGULATOR
1. Remove trim pane], silencer pad, and water shield.
2. Position door glass 150 mm (6 in.) up into glass opening. Firmly pull upward at front edge of glass to disengage lower glass run guide from
division channel.
3. Remove bolts holding window regulator to inner door panel.
4. Slide roller from window lift channel.
5. By hand, pull glass upward to 25 mm (1 in.) from full up position. Using suitable tape, secure door glass to upper window frame.
6. Remove regulator assembly from door.
7. Reverse the preceding operation for installation.
