Spirit R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1992)
11.
For vehicles in notification # 499 only: Replace the crankshaft timing sprocket as follows:
(A)
Remove the crankshaft sprocket using Special Tool Holder C-4685, Screw C-4685-B2 and Insert C-4685-C2, (Figure 6).
Note:
Do not use an impact wrench on the special tool.
(B)
Install the supplied sprocket using Plate L-4524, Installation Thrust Washer L-4524-C4 and Screw C-4685-C1, (Figure 6). Refasten with the
original bolt and tighten to 85 ft.lbs. (115 N-m) torque.
12.
Lower the vehicle.
13.
(All vehicles): Remove the air cleaner fresh air duct.
14.
Remove the ignition cable cover (Figure 7).