dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Turbo III Lubrication, PCV Hose, Crank Sprocket|Page 1388 > < Recall - Turbo III Lubrication, PCV Hose, Crank Sprocket|Page 1386
Page 3
background image

Insert C-4685-C2 
Plate L-4524 
Installation Thrust Washer L-4524-C4 
Screw C4685-C1

Recall # 499 & # 521:
Engine Support Tool C-4852

Owner Notification and Service Scheduling

All involved vehicle owners known to Chrysler are being notified of the service requirement for notification # 499 or # 521 by first class mail. They are
requested to schedule appointments for the service with their dealers at the earliest possible date. A copy of each owner notification letter is included.

Enclosed with each owner notification is an Owner Recall Notification Form. The involved vehicle and recall are identified on the form for owner or
dealer reference as needed.

Service Procedure

Important:
Most steps of this service procedure are common for vehicles in notifications # 499 and # 521. Those additional steps required for # 499 are labeled "For
vehicles in notification # 499 only".

1.

With the ignition in the OFF position, disconnect the battery.

2.

Remove the PCV tube and upper timing belt cover screws (Figure 1) and remove the cover.

3.

Raise the vehicle on a hoist. Drain the engine oil.

4.

Remove the right front tire and wheel assembly.

Recall - Turbo III Lubrication, PCV Hose, Crank Sprocket|Page 1388 > < Recall - Turbo III Lubrication, PCV Hose, Crank Sprocket|Page 1386