Spirit R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1992)
51.
Tighten the rocker arm shafts to 210 lb-in (24 N-m) torque in the sequence shown in Figure 16.
52.
Install the rocker cover and tighten the bolts to 115 in.lbs. (13 N-m) torque. Install the spark plugs and tighten them to 220 in.lbs (25 N-m) torque.
Install the ignition cables and ignition cable cover.
53.
For vehicles in notification # 499 only: Replace the PCV vacuum hose with the supplied hose (Figure 17).
54.
(All vehicles): Reposition the lower timing belt cover and install the 2 lower screws. Tighten them to 105 in.lbs. (12 N-m) torque.
55.
Install the upper timing belt cover and tighten the screws to 105 lb-in (12 N-m) torque.
56.
Reinstall the right front engine mount (Figure 18) using the torque values shown in the figure.
