Sprinter 2500 L5-2.7L DSL Turbo (2003)
1
Unscrew reflector (2) and collar bolts (4)
Installation Replace micro-encapsulated collar bolt (4)
2
Unclip bumper brackets (5) below end panel
3.1 Remove plastic clips (7) With code MBZ, rear-end door step.
Press dowel pin (8) of plastic clip (7) inward.
4
Remove bumper
Installation: The corner parts of the bumper are inserted in the mounts (6) of the corner pillars (not screwed).
5
Pince through cable strap (9)
6
Separate electrical connector (10)
7
Install in the reverse order