Sprinter 2500 L5-2.7L DSL Turbo (2003)
Rear Door Window Glass: Service and Repair
Remove/install Glued Rear Window
Remove/install glued rear window
Remove
1.1 Disconnect electrical connector for rear window defroster
2
Fasten two suction cups on rear window
3
Cut out rear window
Secure rear window against falling down. To prevent damaging the paint, adjust the cutting depth of the cutting blade to 32 mm and tape the inner
metal flange of the window as well as the conductor tracks and wire ends along the edge to the rear window with textile adhesive tape (3), e.g.
Tesa 4657.
4
Remove rear window (1) with suction cup.
Install