Sprinter 2500 L5-2.7L DSL Turbo (2003)
Hood: Service and Repair
Removing and installing engine hood
Removing
1
Engine hood
2
Hood support
3
Collar bolt
4
Washers
5
Hinge
6
Collared nut
1. Unscrew collar nuts (6) at the hinge (5) Support engine hood to prevent damage
2. Unscrew hood support (2) and remove engine hood
Installation
3. Place engine hood on hinges (5) Only position collar nuts and do not tighten
4. Install hood support and bolt securely
5. Adjust engine hood
6. Grease hinges (5)
Removal
1
Engine hood