Sprinter 2500 L5-2.7L DSL Turbo (2003)
(8) Slightly pull door trim upward and swing away slightly.
(9) Unlock retainer clip and disconnect control cable, (Fig. 21)
(10) Remove trim panel
.
INSTALLATION
(1) Position trim panel and connect control cable.
(2) Install trim panel.
(3) Position window frame molding and seat clips fully.
(4) Close pocket door.
(5) Install window crank and mounting ring, if equipped.
(6) Install handle screws.
(7) Connect electrical connectors and install switch bezel.
(8) Install handle cover.
(9) Connect battery negative cable.