Sprinter 2500 L5-2.7L DSL Turbo (2003)
19. Remove riveting tool, inspect riveting, rerivet if necessary (Fig. 61).
20. Repeat procedure for both rivets.
21. Install oil pump.
22. Install oil pan.
23. Refill crankcase with the proper engine oil to the proper level. See: Engine Oil/Specifications
24. Connect negative battery cable.
WARNING: USE EXTREME CAUTION WHEN THE ENGINE IS OPERATING. DO NOT STAND IN DIRECT LINE WITH FAN.
DO NOT PUT YOUR HANDS NEAR THE PULLEYS, BELT OR FAN. DO NOT WEAR LOOSE CLOTHES.
25. Start engine and inspect for leaks.