Sprinter 2500 L5-2.7L DSL Turbo (2003)
21. Repeat procedure for both riveting pins (Fig. 83).
22. Inspect riveting, re-rivet if required (Fig. 84).
23. Install camshaft sprocket with timing chain retained onto camshaft. Tighten camshaft bolts to 18 Nm (159 inch lbs.).
24. Remove camshaft sprocket to timing chain tie straps.
25. Install guide rail and tighten low pressure fuel pump drive to 50 Nm (37 ft. lbs.).
26. Install low pressure fuel pump.
27. Install timing chain tensioner.
28. Install vacuum pump.
29. Install cylinder head cover.
30. Install engine cover.
31. Connect negative battery cable.
WARNING: USE EXTREME CAUTION WHEN THE ENGINE IS OPERATING. DO NOT PUT YOUR HANDS NEAR THE
PULLEYS BELTS OR FAN. DO NOT WEAR LOOSE CLOTHES.
32. Start engine and inspect for leaks. Care must be taken to observe the fuel system warning.
