Sprinter 2500 L5-2.7L DSL Turbo (2003)
License Plate Lamp: Service and Repair
License Plate Lamp Bulb
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the license plate lamp unit from its mounting location, but do not disconnect it from the vehicle wire harness.
License Plate Lamp Bulb Remove/Install
3. Grasp the lamp housing firmly in one hand, then disengage the bulb from between the bulb holders with the other hand.
INSTALLATION
1. Grasp the license plate lamp housing firmly in one hand, then engage the bulb between the bulb holders with the other hand.
2. Reinstall the license plate lamp unit to its mounting location.
3. Reconnect the battery negative cable.
