Sprinter 2500 L5-2.7L DSL Turbo (2003)
Fuse Block: Service and Repair
Fuse Block 1
REMOVAL
1
Disconnect and isolate the negative battery cable.
2. Remove fuse block cover by rotating locking screw 90 °.
3. Remove the steering column cover. Refer to the Body section for the procedure.
4. Unscrew fuse block connections and disconnect all electrical connectors from the fuse block.
5. Remove the fuse block from the steering column.
INSTALLATION
1. Position the fuse block in the steering column.
2. Install fuse block connections and connect all electrical connectors on the fuse block.
3. Install the steering column cover. Refer to the Body section for the procedure.
4. Install fuse block cover by rotating locking screw 90 °.
5. Connect the negative battery cable.
6. Set time and radio stations.