dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Engine, A/C - Idle Instability With Rear A/C ON|Page 793 > < Engine, A/C - Idle Instability With Rear A/C ON|Page 791

Sprinter 2500 L5-2.7L DSL Turbo (2003)

Page 3
background image

5. Solder the connection together using rosin core type solder only (Fig. 3).

6. Center the heat shrink tubing over the joint and heat using a heat gun. Heat the joint until the tubing is tightly sealed and sealant flows out of both

ends of the tubing (Fig. 4).

POLICY:

Engine, A/C - Idle Instability With Rear A/C ON|Page 793 > < Engine, A/C - Idle Instability With Rear A/C ON|Page 791