Sprinter 2500 L5-2.7L DSL Turbo (2003)
Parking Brake Warning Switch: Service and Repair
PARK BRAKE SWITCH
REMOVAL
Park Brake Switch Remove/Install
1. Remove the trim cover from the park brake lever.
2. Remove the screw that secures the park brake switch and the ground eyelet terminal to the park brake lever.
3. Disengage the park brake switch from the park brake lever.
4. Disconnect the vehicle wire harness connector for the park brake switch from the switch terminal.
5. Remove the park brake switch from the park brake lever.
INSTALLATION
1. Position the park brake switch near the park brake lever.
2. Reconnect the vehicle wire harness connector for the park brake switch to the switch terminal.
3. Engage the park brake switch into the park brake lever.
4. Install and tighten the screw that secures the park brake switch and the ground eyelet terminal to the park brake lever.
5. Reinstall the trim cover onto the park brake lever.
