Sprinter 2500 L5-2.7L DSL Turbo (2003)
11. Install the strainers for the modulating pressure and shift pressure control solenoid valves (Fig. 128) into the valve housing.
12. Install the electrohydraulic control module (12) onto the shift plate (13) (Fig. 129).
13. Bend the retaining lug on stiffening rib on transmission oil temperature sensor to retain the electrohydraulic control module.
14. Install the solenoid valves (6 - 11) into shift plate (13).
NOTE: Check O-rings on solenoid valves for damage and replace if necessary.
15. Install the leaf springs (5).
16. Install the Torx socket bolts (3, 4) (Fig. 129). Tighten the bolts to (8 Nm (71 inch lbs.).