Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Removal
REMOVAL
Door Latch - Right Door
1. Remove lower door trim (6) and upper door trim (8) from door.
2. Remove the inside door handle (7).
NOTE: Using a grease pencil or equivalent, mark the position of the upper door latch to aid installation.
3. Remove the upper door latch (1), Door Latch - Right Door Upper.
4. Press release elver (10) off of the lock cylinder (11).
5. Remove the bolts (2) from the door latch (3).
6. Unthread cables (13) of inside door handle.
7. Pull door latch (3) with cables (13) and locking rod by turning clockwise in direction to center of door.
8. Unhook cable (12) from outer door handle.
9. Disconnect electrical connector from the latch assembly (3).
10. Remove the latch assembly (3) from the door.
Door Latch - Right Door Upper
NOTE: Using a grease pencil or equivalent, mark the position of the upper door latch to aid installation.
1. Remove the bolts (1) and remove the upper latch (2).
2. Disconnect the cable (3) from upper door latch (2).
Installation
INSTALLATION
Door Latch - Right Door