Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
1
Phillips screw
2
Front end paneling
3
Phillips screw
4
Phillips screw
5
Auxiliary turn signal lamp
6
Body-bound rivet
7
Bracket
8
Phillips screw
9
Hexagon bolt
10
Internal torx bolt
Removing, installing
1
Remove front bumper
2
Remove front grille
3
Remove lock cross member
4
Remove headlamp
5
Unclip auxiliary turn signal lamp (5) (arrow). Disconnect connector and remove
6
Pull out spreading rivet (6) and remove bumper support (7)
7
Remove sealant between area (A) of wheelhouse and front end paneling
Installation: Replace sealant
Mopar or equivalent body sealant for sealing seams (suitable for painting)
8
Unscrew screws (3) from A-pillar
9
Unscrew screw (4) from wheelhouse
10
Unscrew screws (8, 9, 10)
11
Remove front end paneling (2) Remove sealant residues