Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Scuff Plate: Service and Repair
Removal
REMOVAL
Front
1. Remove the bolts (2) from the cover strip (1).
2. Using a trim stick C-4755 or equivalent, pry out plug (7).
3. Remove the bolts (3, 6) from door sill trim (5).
4. Loosen bolt (8) on B-pillar paneling.
5. Remove the door sill trim (5).
Rear
1. Remove the lower D-pillar trim. Refer to Trim Panel.
2. Using a trim stick C-4755 or equivalent, pry out wedges (4).
3. Remove the covers (1).
4. Remove the bolts (2, 3) and remove the guide pin (5) and striker (6).
5. Remove the sill trim.
