Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Antenna - Keyless Entry: Service and Repair
Removal
REMOVAL
FRONT DOOR RKE ANTENNA
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel.
3. Disconnect the electrical connector.
4. Remove the mounting fasteners and remove the RKE Antenna mount.
5. Remove the fasteners and remove the antenna from the mount.
SLIDING DOOR RKE ANTENNA
1. Disconnect and isolate the battery negative cable.
2. Remove the sliding door trim panel.
3. Remove the mounting bracket fasteners.
4. Remove the electrical connectors.
5. Remove the antenna fasteners and remove from the mounting bracket.
