Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
1. Install the wheel speed sensor (2) in the axle tube (4) and tighten the bolt (1). Tighten to 8 Nm (71in.lbs.).
2. Install the tie straps (3) and the wire into the routing clips.
3. Reconnect the sensor electrical connector.
4. Lower the vehicle.
Dual Rear Wheel (DRW)
DUAL REAR WHEEL (DRW)
1. Install the wheel speed sensor (2) in the axle tube and tighten the bolt (1). Tighten to 8 Nm (71in.lbs.).
2. Install the tie straps) and the wire into the routing clips.
3. Reconnect the sensor electrical connector.
4. Lower the vehicle.