Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
NOTE: Ensure that the riveted link and riveting tool are aligned.
10. Press in new riveted link as far as the stop.
11. Remove guide link and riveting tool to change inserts.
12. Install insert 9312-8a on riveting tool.
NOTE: The outer plate is held magnetically by riveting tool.
13. Insert new outer plate into the moving assembly insert.
14. Position riveting tool so that spacer webs of the guide are side by side.
15. Ensure that riveted link and outer plate are aligned.
NOTE: When turning spindle of riveting tool, be sure that pins of riveted link are inserted into holes of outer plate
16. Screw in spindle of riveting tool until firm resistance is felt.
