Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
1. Install the front crankshaft seal in the timing cover (1).
2. Install the timing cover (1). Tighten bolts to 9 Nm (7 ft. lbs.).
3. Raise and support the vehicle.
4. Install the front oil pan bolts. Tighten bolts to 10 Nm (88 in. lbs.).
5. Lower the vehicle.
6. Install the vibration damper and pulley. Tighten bolt to 210 Nm (154 ft. lbs.), and then an additional 180°
7. Install the accessory drive belt tensioner. Tighten bolt to 58 Nm (43 ft. lbs.).
8. Install the idler pulleys. Tighten bolts to 28 Nm (20 ft. lbs.).
9. Install the accessory drive belt.
