Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Timing Chain Tensioner: Service and Repair
Installation
INSTALLATION
NOTE: Carefully clean all mating surfaces with appropriate solvents to assure that no grease or oil is present during reassembly.
1. Install timing chain tensioner with new gasket. Tighten to 80 Nm (59 lbs.ft.).
2. Install cable strap on the engine wiring harness.
3. Install air cleaner housing.
4. Install intake air duct.
5. Reconnect negative battery cable.
WARNING: Use extreme caution when the engine is operating. Do not put your hands near the pulleys, belts or fan. Do not wear loose
clothes.
6. Start the engine and inspect for leaks.
