Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Note: Clean all mating surfaces.
1. Properly position water pump with new gasket to the engine and tighten bolts to 14 Nm (10 ft lbs).
2. Install the EGR airflow valve assembly. See: Powertrain Management/Emission Control Systems/Exhaust Gas Recirculation/EGR Valve/Service
and Repair
3. Install the oil dipstick retaining bolt.
4. Install the lower charge air cooler hose.
5. Install the generator. See: Starting and Charging/Charging System/Alternator/Service and Repair
6. Install the serpentine belt (1). See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair