dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Electronic Vehicle Information Center|Page 7157 > < Electronic Vehicle Information Center|Page 7155
Page 8
background image

Setting the month

13. Select the Clock/Date submenu using the PLUS or MINUS button.
14. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Date Month" message in the display.
15. Set the month by pressing the PLUS or MINUS button.

Setting the year

16. Select the Clock/Date submenu using the PLUS or MINUS button.
17. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Date Year" message in the display.
18. Set the year by pressing the PLUS or MINUS button.

LIGHTING SUBMENU

You can reach the Lighting submenu via the Settings menu. The following are the settings you can make in the Lighting submenu:

-

Set constant headlamp mode

-

Switch the locator lighting on or off

-

Switch the exterior lighting delayed switch on or off

Setting constant headlamp mode

If you have set constant headlamp mode and the light switch is at 0, the following light up automatically when the engine is running:

-

The parking lamps and low-beam headlamps

-

The tail lamps

-

The license plate lamp

NOTE:  For safety reasons, it is not possible to reset the Hdlmp. mode function to the factory setting while the vehicle is in motion. You will see the
following message in the display: Setting only possible at standstill USA only: If you turn the light switch to PARK LAMPS or LOW-BEAM, the
corresponding light switches on. Constant headlamp mode remains activated if the light switch is turned to AUTO. Canada only: If you turn the light
switch to LOW-BEAM, the low-beam headlamps are switched on. Constant headlamp mode remains activated if the light switch is turned to PARK
LAMPS or AUTO.

1. Press the PLUS or MINUS to select the Lighting submenu.
2. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Hdlmp" mode message in the display. The current setting is

highlighted.

3. Press the PLUS or MINUS button to select whether you wish to operate the lighting manually or whether you wish to set constant headlamp

mode.

Switching the locator lighting on or off

If you switch the locator lighting to On, the following lamps light up in the dark after you have unlocked the vehicle using the key:

-

The parking lamps

-

The tail lamps

-

The license plate lamp

-

The front foglamps

The locator lighting automatically switches off after 40 seconds or when you perform one of the following:

Electronic Vehicle Information Center|Page 7157 > < Electronic Vehicle Information Center|Page 7155