Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
-
Open the driver's door
-
Insert the key into the ignition lock
-
Lock the vehicle with the key
4. Press the PLUS or MINUS to select the Lighting submenu.
5. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Loc" lighting message in the display. The current setting is
highlighted.
6. Press the PLUS or MINUS button to switch the locator lighting On or Off.
Setting the exterior lighting delayed switch-off
The Headlamps (headlamps delayed switch-off) function enables you to set whether or not the exterior lighting should remain on in the dark after the
doors have been closed. When you have set the delayed switch-off and have switched off the engine, the following light up:
-
The parking lamps
-
The tail lamps
-
The license plate lamp
-
The front foglamps
You can reactivate this function by opening a door within 10 minutes. The lights are switched off after 60 seconds if you do not open a door or if you
close an opened door after the engine has been switched off.
7. Press the PLUS or MINUS to select the Lighting submenu.
8. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Headlamps" message in the display. The current setting is
highlighted.
9. Press the PLUS or MINUS button to select whether and for how long the lights should remain on.
VEHICLE SUBMENU
You can reach the Vehicle submenu via the Settings menu. The following are the settings you can make in the Vehicle submenu:
-
Set station selection
-
Set the windshield wiper sensitivity
Setting the windshield wiper sensitivity
You can use the Wiper sensor function to set the sensitivity of the rain sensor.
1. Press the PAGE FORWARD or PAGE BACKWARDS button repeatedly until you see the "Vehicle" message in the display.
2. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Wipe sensor" message in the display. The current setting is
highlighted.
3. Press the PLUS or MINUS button to select the level of sensitivity of the rain sensor.
-
Level 1: High sensitivity Wiping beings in light rain
-
Level 2:Moderate sensitivity
-
Level 3:Low sensitivity. Wiping only begins in heavy rain.
CONVENIENCE SUBMENU
You can reach the Convenience submenu via the Settings menu.
Key-dependent settings
You can use the Key function to determine whether the settings in the following Submenus are stored as key-dependent settings:
