Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
EGR Valve: Service and Repair
Valve - EGR 3.0L Diesel
Removal - 3.0L Diesel
REMOVAL - 3.0L DIESEL
1. Disconnect the negative battery cable.
2. Remove engine cover.
3. Disconnect the EGR valve harness connector (1).
WARNING: Do not remove the coolant hoses or open the cooling system when it is hot and under pressure. Serious burns from coolant
can occur.
4. Disconnect the coolant hoses (2) from the EGR valve.
5. Remove the rear EGR valve retaining bolts (1).
6. Remove the front EGR valve retaining bolts (1) and valve (2), discard the gasket.
Installation - 3.0L Diesel
INSTALLATION - 3.0L DIESEL