Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Steering Column Cover: Service and Repair
Installation
INSTALLATION
WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, seat belt
tensioner, or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two
minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the
airbag system. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.
1. Install the screws (3) and the lower steering column opening cover (2), and the side cover (1).