Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
6. Install the left outer tie rod end (3) and jam nut (2) to the inner tie rod (1).
7. Install both the outer tie rod ends (3) to the steering knuckle (6). Tighten to 50 Nm (37 ft. lbs.) Plus an additional 60° turn.
8. Install the upper stabilizer bar link to the stabilizer bar.
9. Install the front wheels.
10. Fill and bleed the power steering system.
11. Reset toe adjustment.
12. Check steering system for leaks.